YoiYee M10 x 80mm Heavy Duty Concrete Sleeve Anchor Bolts, 5 Pack

Key features

• Drill & Sizing Requirements - M10 bolt thread with 80mm overall length. Requires a 12mm masonry drill bit and a minimum hole depth of 85mm for a secure flush fit.
• Expansion Grip Mechanism - External metal sleeve expands uniformly against the substrate walls as the hex nut is tightened, creating high-friction holding power in solid masonry.
• Recommended Substrates - Secures firmly into solid concrete, brickwork, and natural stone. Unsuitable for hollow blockwork, aerated concrete, or plasterboard partitions.
• Fixture Applications - Anchors garage shelving frames, external handrails, timber fence posts, structural base plates, and wall-mounted machinery brackets.
• Zinc Plated Steel Pack - 5 heavy-duty sleeve anchors supplied pre-assembled with expanding sleeves, matching M10 hex nuts, and flat washers for indoor and sheltered outdoor use.

Description

These M10 mechanical sleeve anchors fasten load-bearing fixtures directly into solid concrete, masonry, and stone. Tightening the hex nut pulls the tapered cone through the outer steel sleeve, forcing it to expand outward and wedge firmly inside the pre-drilled hole. Specifications Thread Size: M10 Total Length: 80mm Required Drill Bit Diameter: 12mm Minimum Drill Hole Depth: 85mm Material: Zinc Plated Carbon Steel Included Hardware: Expanding sleeve, hex nut, flat washer Pack Quantity: 5 Works Great For Securing steel handrail brackets to exterior brickwork, bolting workshop shelving to concrete garage floors, and mounting timber fence post supports to masonry foundations. Pro Tip Clear all masonry dust from the 12mm drilled hole using a blow pump or vacuum before inserting the sleeve anchor, ensuring direct metal-to-masonry friction. Package 5 x M10 x 80mm sleeve anchor bolts with pre-fitted expansion sleeves, hex nuts, and washers

Downloads